Price:Unfilled

Send inquiry

 

Water Shower Sterilizer for Plastic Bag is a kind of sterilizer with high performance and advanced intelligence. It is mainly used for the sterilization of IV solution. It adopts high temperature cycling water as medium to realize uniform sterilization at low temperature, and avoid "dead corner" due to the existing of cooling air as well as the transfusion re-pollution due to the unclean cooling water in the cooling step.

 

It can ensure that the bag keep a good shape after sterilization by adopting the unique pressure balance technique in the whole process.

This sterilizer can be used for sterilization of glass bottles and plastic bottles after changed loading cart and control software.

 

 

Send the loading carts with bags to the chamber;

Close the door and seal it;

Feed circulating water;

Start circulating pump, heat and spray to the bags, the chamber begins to warm up and step up;

The pressure in chamber is adjusted to keep the pressure balance in and out of the bag;

It begins to time when the temperature inside bag reaches the preset sterilizing temperature;

It begins to cool down after sterilization, the pressure in chamber begin to change and balance with temperature;

The pressure shall be release out when it reaches to the cooling temperature;

Open the door and take out the loading carts;

Discharge and change the circulating water in a certain time or according to the polluted level;

 

Parameter	Numerical value
Container category	I
Design pressure	0.30Mpa
Maximum working pressure	0.27Mpa
Design temperature	1500C
Maximum operating temperature	1340C
Operating temperature range	70-1210C
Steam pressure	0.3-0.5Mpa
Deionized water source	0.15-0.3Mpa
Cooling water source	0.2-0.4Mpa
Compressed air source	0.4-0.6Mpa

 

 

http://www.hebeilandbridge.com/